Why is my car heater not blowing air?

If the heater isn’t blowing any air, a faulty blower motor or electrical connection might be the problem. … If the blower doesn’t receive power, check that the blower fuse isn’t blown. A blown fuse often indicates an underlying problem, so never replace one with a larger fuse to prevent it from blowing out again.

Why is there no air coming out of my car vents?

Here are some of the most common causes of why air doesn’t flow out of your vehicle’s vents: Your air intake is clogged, meaning that air isn’t getting in from the outside at all or isn’t circulating properly. There is a blown fuse in the ventilation system. Electrical issues such as a bad relay.

Why is my car heater not blowing heat?

A heater can stop working for a number of reasons, including: A low antifreeze/water level in the radiator due to a leak in the cooling system. A bad thermostat that isn’t allowing the engine to properly warm up. A blower fan that isn’t working properly.

IMPORTANT:  Quick Answer: How much does an LS engine and transmission weight?

Why is there no heat coming out of my vents?

Four common reasons there isn’t enough hot air blowing out of your vents are: A Vent is Blocked. The Air Filter is Clogged. Leaky Ductwork.

Is there a fuse for the heater blower?

Many vehicles have two fuses for the blower motor, one in the interior fuse block and the other under the hood. … The blower motor is usually under the dashboard on the passenger side.

Why is the heater blowing cold air in my car?

If one or more of these issues is present, your vehicle may blow out cool air rather than heat: Not enough coolant in the engine. Problems with the heater core. Clogged or broken heating controls.

What are the signs of a bad thermostat?

Symptoms of a Bad or Failing Thermostat

  • Temperature gauge reading very high and engine overheating. …
  • Temperature changing erratically. …
  • Coolant leaks around the thermostat housing or under the vehicle.

What do I do if my heater is blowing cold air?

When your furnace blows cold air, try turning the heating unit off and on. If the air feels warm for a moment or two, then switches to cold, it may be that the flame sensor is dirty. With a dirty flame sensor, your gas burner won’t stay lit, causing the air to go cold soon after the furnace turns on.

What to check if heat is not working?

Heater Not Working? 7 Troubleshooting Tips:

  1. Check that your thermostat is set to “heat.” …
  2. Change the filter. …
  3. Make sure the gas is on. …
  4. Clear the chimney exhaust flue. …
  5. Clean away leaves and debris from exhaust vents. …
  6. Flush out the drain lines. …
  7. Check for blocked ducts restricting airflow.
IMPORTANT:  Frequent question: Can you sell a car with mechanical problems to CarMax?

Why the heater is not working?

Often, the issue is that the heating system is simply dirty. If your furnace has a dirty blower, the blower could cause equipment failure. … In short, a dirty blower can cause the heat exchanger to fail. Dirty air filters could also be the reason your heater stopped working.

Why is cold air coming out of my vents when the heat is on?

Your Air Filter Is Dirty

Clogged air filters could be causing cold air to blow out of your vents. A dirty air filter can block airflow over your furnace’s heat exchanger, which can cause it to overheat.