You asked: Which OBD scanner can read transmission codes?

CAN OBD2 read transmission temperature?

Yep, you can get the transmission temp with the OBD2 bluetooth adapter and Torque Pro.

Is there a transmission scanner?

ENG/AT/ABS/SRS DIAGNOSES: LAUNCH VII+ OBD2 scanner can easily access to the Engine, Transmission, ABS, and SRS to retrieve their DTCs, text or graphic live data stream and other ECU information. … WIDE VEHICLE COVERAGE: You can use this OBD2 scanner to diagnose a wide range of vehicles even 12V diesel cars.

Does ZR13 read transmission codes?

The ZR13 OBD2 Code Reader by ZURICH® is the ultimate in code readers. The ZR13 works on virtually all domestic, European and Asian vehicles. It diagnoses and erases ABS codes and lights, is equipped to graph and record live data, and allows technicians to reset the battery.

How do I check my transmission temperature?

Install the scan tool, start the vehicle and look for the transmission temperature. The fluid temperature should be between the 185- and 194-degree marks with an idle of 600 to 800 rpms. Remove the bolts and clips from the front fender well on the driver’s side, and locate the transmission fill plug; remove it.

IMPORTANT:  How do you fill transmission fluid in a Duramax?

Can blue drivers read transmission temperature?

Unfortunately transmission temperature is not part of the OBDII standard live data set and is not currently supported by BlueDriver.

Is there a diagnostic test for transmission?

The AAMCO Computer Diagnostic Service is performed to determine if an electronic component is affecting your transmission’s shifting or overall performance and includes: Using a computer system scanner to retrieve any trouble codes and to determine the probable cause.

How do I find my transmission code?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

What are the transmission codes?

Full Transmission DTC Codes Table

Trouble Code Description
P0700 Transmission Control System (MIL Request)
P0701 Transmission Control System Range/Performance
P0702 Transmission Control System Electrical
P0703 Torque Converter/Brake Switch B Circuit

How do you diagnose a transmission?

Transmission Trouble: 10 Warning Signs You Need Repair

  1. Refusal to Switch Gears. If your vehicle refuses or struggles to change gears, you’re more than likely facing a problem with your transmission system. …
  2. Burning Smell. …
  3. Neutral Noises. …
  4. Slipping Gears. …
  5. Dragging Clutch. …
  6. Leaking Fluid. …
  7. Check Engine Light. …
  8. Grinding or Shaking.

Are Zurich code readers any good?

5.0 out of 5 stars GREAT OBD II reader-RESETS Ford Battery Control Module.! Has nice display for all the OBD readings. However, unlike most other OBD code readers; this reader will RESET the Battery Control Module when you replace the battery.

IMPORTANT:  Quick Answer: How long can a car battery sit discharged?

Can Autozone read transmission codes?

So, neither Autozone, nor any other auto-parts store employee, are not allowed to go read trouble codes for people. This makes consumers HAVE to go to an auto repair shop to get codes read.

How do you read BMW transmission codes?

How to read BMW Fault Codes

  1. Locate the diagnostic port under the dashboard.
  2. Plugin your BMW scan tool.
  3. Turn on the ignition but don’t start the engine.
  4. Select the BMW model and chassis after the scanner turns on.
  5. Select Auto Scan or Control Unit.
  6. Scroll down, select Read Codes, and press enter.

Which Zurich code reader should I buy?

The Zurich ZR4 is the line’s baseline code reader. Ideal for service writers and weekend mechanics, the ZR4 is compact, convenient and quickly reads and clears trouble codes and lights.

What is a transmission scan?

Transmission scan is performed using an external radioactive positron-emitting source (usually 68Ge/68Ga). Another scan with the same source has been performed earlier (usually each morning) without the patient (blank scan). Attenuation correction factors (≥1.0) are computed from the transmission and blank scan.