Which way does transmission fluid flow radiator?
According to the FSM, the tranny fluid flows out of the front port on the tranny, goes to the passenger side of the cooler in the radiator, exits the driver side of the cooler, and goes to the rear port on the tranny. In mine, something appears to be backwards.
Do transmission lines run through the radiator?
Car transmission lines connect your vehicle’s transmission to the vehicle’s radiator. Also known as transmission cooling lines, they are typically made of metal or composite aluminium and rubber hoses because they can handle the flow of hot transmission fluid.
Are transmission coolers directional?
Can Transmission Fluid Flow Through Either Direction on a Transmission Cooler. Helpful Expert Reply: … The cooler can have fluid flow in either direction through it.
How do transmission cooler lines connect to radiator?
Transmission coolers do not attach to the radiator. They attach in-line with the transmission fluid return line. It is common for an OEM transmission cooler to be built into the radiator tank to be cooled by the coolant in the radiator.
What happens if you hook up transmission lines backwards?
If you had it reversed, the pump would be trying topush fluid through the bottom of the cooler, up through the cooler, out the top into the bottom of the rad, and up through the rad to the top. More weight to push.
How does transmission fluid flow?
ATF is pressurized by the transmission oil pump that is driven by the engine. The pressurized fluid flows through the transmission to engage and disengage the clutches and bands. A valve body, usually located in the bottom of the transmission, controls the fluid flow to the clutches and bands.
Can I use rubber hose for transmission cooler lines?
You can use rubber hose, but make sure it’s transmission cooler line rated. The pressure is quite low (12-15 psi). Double clamp it or use FI type clamps instead of the worm-drive style.
What happens when transmission fluid mixed with antifreeze?
There is a separate tank and hose in the radiator for transmission fluid. They allow the coolant to take heat away from the transmission fluid without mixing the two liquids. When a leak occurs, the transmission fluid and engine coolant mix with each other causing your transmission to seize up.
Should transmission cooler be before or after radiator?
Should the cooler be installed before or after the radiator? Answer: We recommend installing the auxiliary cooler after the radiator to return the coolest fluid directly to the transmission.
Does it matter which way you mount a transmission cooler?
More often than not, transmission cooler orientation does not make much of a difference. While some may argue that you need to install a certain type of cooler inverted to prevent air bubbles, the transmission line pressure it strong enough to push fluid through the entire cooler to prevent this.
Can a transmission cooler be mounted upside down?
Do Transmission Coolers Have to Install Right Side Up Or Can they be Upside Down. Expert Reply: The Derale stacked plate transmission coolers like part # D13403 can be mounted in any orientation that you need including having the hose fittings down. … Some just prefer the install of one over the other.
Where are transmission cooler lines?
Remove the two transmission cooler lines from the bottom of the radiator. These two lines can be accessed either from underneath the hood or underneath the vehicle. Use the flare nut wrench to remove the lines in the same manner used to remove the lines from the transmission.
Can transmission fluid leak from the radiator?
Transmission fluid will leak from the heat exchanger into the radiator where it contaminates the engine coolant.
Does transmission cooler use antifreeze?
The cooler for the automatic transmissions are placed inside the radiator, the reason behind this is the antifreeze provides the perfect environment. … The auxiliary cooler is cooled by air flow while the cooler inside the radiator is surrounded by antifreeze which is a controlled environment.