How can I tell what Ford engine I have?

Locate the ID tag under coil attaching bolts for six-cylinder and some eight-cylinder engines. The tag is a series of numbers and letters etched in and used to decipher the year, make, and model of you engine. It is found underneath the bolts on the left or right side of the engine, near the front of the car.

Which digit in a Ford VIN is the engine code?

American VIN formatEdit

Position Sample Description
7 J Vehicle line, series and body code
8 9 Engine code
9 9 Check digit
10 2 Model Year

How do you decode a Ford engine block?

Look at the first digit of the Ford block date code, which appears like a four-digit code, sometimes with a fifth digit representing the engine size or horsepower. The first number represents the decade year. For this example, in a four-digit code of “5E30”, “5” means 1995 when appearing as the first digit.

How do I identify a small block Ford engine?

The older 221 and 260 Ford small-blocks are easily identified. According to MRE-Books, these two engines use a five-bolt bell housing and are stamped with the casting code “C2OE” or “C3OE.” All Ford small-block casting codes are located on the right side of the engine block just above the starter.

IMPORTANT:  Your question: Does turning off your engine save gas?

How do you tell if I have a 289 or 302?

Just codes. The 289 would be “1M”, and the 302 would be “2M”, or “2MA”. Pull the oil pan and you’ll know.

How can I tell what engine my Ford F150 has?

The vehicle identification number (VIN) is among the most important of these. Located on the driver’s side window dash and/or door pillar, the VIN reveals a plethora of useful information, including the year and engine type of your F150.

What does the 8th digit of a VIN mean?

Vehicle Description Section

The fourth through eighth digits describe your vehicle’s model, body type, restraint system, transmission type, and engine code. The ninth digit is the check digit, which is used to detect fraudulent VINs.

How do I identify a Ford 460 engine?

Ford placed stickers on the valve covers identifying the engine as a 460. If the sticker is gone, or the covers have been replaced, look for a metal tag with engine identification attached to either the intake manifold in front of the carburetor, or to the ignition coil on the front of the engine.

How do I decode a Ford VIN number?

How to Decode a Ford VIN?

  1. 1 = Country of manufacture (United States)
  2. F = Manufacturer (Ford)
  3. D = Vehicle Type (Incomplete Vehicle)
  4. X = Restraint Type.
  5. F46 = Model (Ford F-Series, F-450, Regular Cab, 2WD)
  6. S = Engine Type (6.8 SOHC SEFI V10; Gasoline 275HP)
  7. 1 = Security Code.
  8. 2 = Model Year (2002)

How do I identify a Ford 4 cylinder engine?

The easy way to tell these two versions apart is by the engine block casting number. Ford engine block part numbers always have 6015 in the middle, so we can ignore that part. The last two numbers were used to indicate the displacement (“BA” means 1600cc, “AA” means 1300cc), so we just focus on the first few digits.

IMPORTANT:  Your question: What puts the most wear on a transmission?

How do I identify a Ford V8 engine?

Ford V8 Engine Identification – FORDification.com. The quickest way of differentiating between the different familys of Ford engines is to simply count the valve cover bolts. The early 351W has four extra intake manifold bolts (13, 14, 15 and 16). If you see them, it’s definitely a 351W.

How do I identify a Ford 289 engine?

Registered. If you remove the Valve Covers the Heads will be Stamped 289 or 302 inside as well as a Date Code in this format: [7L22] or [8A2] for example. The Casting Numbers for the Cylinder Heads are on bottom and only visible if the Heads are removed, typically.

How do you tell if a motor is a 302 or 351?

The 351 blocks were as much as 1.300 in. taller to allow for a longer Stroke . You can spot the difference pretty easily by looking at the front of the engine. On a 302 (or smaller c.i.d.) blocks, the distributor mount is almost flush with the top of the block (where the intake sits).

How can you tell the difference between a 302 and 351?

the 351 is about 1.5″ wider and taller then the 302. if its a 351C it will have 8 bolts holding the valve cover on the 289-351W has 6 bolt valve covers. another way is to get a casting number off the intake an check to see what it fits. it can be tricky to tell a 302 from a 351w if your not use to seeing them both.