How do I identify my Dodge transmission?
Look inside the truck cab on the driver’s side to see if there is a clutch pedal. If there is a clutch pedal, this means that the Dodge Ram has a manual transmission. If there is no clutch pedal, then the truck has an automatic transmission.
Does VIN number tell your transmission?
For many makes, the VIN is always enough information to determine transmission.
How do I find out what transmission I have?
Another way is to crawl under the vehicle and look for part numbers. Using a good flashlight, look for part numbers stamped into the transmission pan or the transmission itself. Your local auto part store or dealer will be able to cross-reference the numbers to determine the kind of transmission the part belongs to.
What transmission do I have in my Dodge Ram 1500?
The 2021 Dodge Ram 1500 comes standard with an 8 speed automatic transmission.
What is a 47RE transmission?
47RE: An electronically controlled four-speed automatic transmission found in ’96 to ’02 Dodge trucks, as well as some ’03 models. 48RE: An electronically controlled four-speed automatic transmission found in ’03 to’07 Dodges.
How do you tell if you have a 47RE or an 47rh?
The easiest way to tell the difference is the plug where wires plug into trans coming from PCM. The RH has a 4 pin not quite flat like a trailer connector and the RE has a round 8 pin plug. The RH uses an external fluid temp sensor while the RE has a thermistor inside of the governer pressure sensor.
What letter in the VIN is the transmission?
Decoding them will help you know which is your vehicle’s transmission type. In most, if not all cases, the vehicle’s transmission type should be within the 4th and the 8th digit of the Vehicle Identification Number.
How do I tell if I have a CVT transmission?
The best way to identify a CVT transmission in your vehicle is to look for the manufactures logos indicating one, such as Toyota’s Synergy Drive, Honda’s Multi Matic and Nissan’s Xtronic.
Where do I find my gearbox code?
The gearbox code can be found stamped into the gearbox or on a sticker on the gearbox. The location and what the code looks is dependant on the manufacturer of the car , some manufacturers put a sticker on the sump whereas others stamp it into the gearbox.
How do I know if I have 4L60E or 4L65E?
The two transmissions cannot be differentiated from the outside. The 4L65E shares the same exterior parts but have stronger internals such as 5 pinion planets compared to 4 in the 4L60E. 4L60E uses a 6.5″ depth bell with 6 bolts for non gen 3 LS applications and a 7″ depth bell with 7 bolts for LS applications.
What do the numbers on a transmission mean?
Rather, each number simply represented the highest gear to which the transmission would shift automatically with the lever in that position. … When driving in the mountains, a lower gear provides more engine braking and keeps the transmission from shifting as often, which can overheat it.
What transmission Do I have E90?
BMW 3 Series (E90)
|BMW 3 Series (E90/E91/E92/E93)|
|Transmission||6-speed manual 6-speed ZF 6HP automatic 7-speed dual-clutch|
|Wheelbase||2,760 mm (108.7 in)|
|Length||4,520–4,610 mm (178.0–181.5 in)|
What transmission does RAM use?
Aisin: The Aisin 6-speed automatic is one of the transmissions available with Ram’s 6.7L Cummins turbo-diesel engine. This engine produces up to 400 hp and 1,000 lb-ft of clean-diesel torque. With the Aisin transmission, it can tow 31,000 pounds.
Are 5.2 and 5.9 transmissions the same?
Any ’96 or newer 5.2 or 5.9 transmission will work. The 5.9 flexplate has balance weight on it. The 5.2 is internally balanced and has no weight on the plate. You can use a 5.9 flexplate on a 5.2, just remove the weight.
How do I know if I have a 68RFE transmission?
All you have to do is open up the hood:
- If your yellow dipstick handle is on the right side of your engine (the driver’s side), you’re likely looking at a vehicle with an Aisin transmission.
- If your dipstick is just to the left of your engine, you’re most likely dealing with the 68RFE.