What cars have a 3 8 L engine?

The GM 3800, 3.8-liter V-6 came in the Chevrolet Monte Carlo, Malibu, El Camino, Impala, Monza, Caprice, Camaro and Lumina. Chevrolet replaced the Buick version with another 3.8-liter V-6 version, based on the Chevrolet 305 V-8, from 1980 to 1985. But the Buick V-6 returned to power post-1985 Chevys as the GM 3800.

What cars have 3.8 supercharged?

That said, you can find supercharged 3800 engines in the 1996-2005 Buick Park Avenue Ultra, the 1997½-2004 Buick Regal GS, and the 1996-1999 Buick Riviera, as well as various models from Pontiac, Chevrolet, and other makes within the GM family.

Is a 3.8 L V6 good?

The 3.8 liter V6 was a conservatively designed, wider-bore, longer-stroke version of the then-new 3.3-liter V6. It was a good, solid engine from the start – not the highest performer or the lowest, but relatively quiet, driveable, and reliable.

Premium Member.

Category 3.8 Liter
Fuel ​ Regular (US: 87 octane)

How good is the 3.8 engine?

However, the Chrysler 3.8 does still offer solid reliability all around. High oil consumption and some coolant and gasket leaks can be common issues. … Do this on the Jeep & Chrysler 3.8 engine and it can offer good reliability. Again, there are handfuls that make it beyond 250,000 miles which is pretty good longevity.

IMPORTANT:  How long can you leave your car running with the AC on?

What size is a 3.8 L engine?

Engine Size Chart

Liters (L) Cubic Centimeters (CC) Cubic Inches (cid)
3.3 3,278 200
3.5 3,475 212
3.7 3,688 225
3.8 3,753 229

What is a 3800 engine?

The Buick V6, popularly referred to as the 3800 in its later incarnations, originally 198 cu in (3.2 L) and initially marketed as Fireball at its introduction in 1962, was a large V6 engine used by General Motors. The block is made of cast iron and all use two-valve-per-cylinder iron heads, actuated by pushrods.

How much HP does a 3.8 V6 have?

An Awakening… In box stock form, the 3.8L Essex V-6 produces 145-150 hp at the crankshaft. According to Super Six Motorsports, that’s 0.625 hp per cubic inch or 38.2 hp per liter.

What year jeeps had 3.8 engines?

3.8L Engine Vehicle Fitment

During the years 2007 to 2010/2011, it was the popular choice for an engine (no V8 was available), in both the 2-door Wranglers and the 4-door JK Unlimited versions.

When did Buick stop making the 3800 engine?

a balance shaft and other improvements. 1988-2003: The 3800 becomes GM’s workhorse engine. The engine grew to 225 cubic inches in 1964. Production stopped in 1967, and GM sold engine and production tooling to the Kaiser-Jeep Corp., the company that owned the Jeep brand.

What is a L67 engine?

The L67 was a supercharged 3.8-litre pushrod V6 petrol engine that was available in Holden vehicles from 1996 to 2004. Developed by GM, the L67 engine was based on the naturally aspirated L36 but had several significant differences.

IMPORTANT:  How much does it cost to recharge a car battery at AutoZone?

Who makes Jeep Wrangler engines?

For the 2012 model year the 3.8L V6 was replaced by Chrysler 3.6L Pentastar VVT V6 engine previously seen in the Jeep Grand Cherokee (WK2), now producing 285 horsepower, and 260 pound-feet of torque.

Are 3.6 jeeps reliable?

So it is fair to say the 3.6 V6 Pentastar is a good reliable engine. It pulls strong with impressive acceleration. It is regarded as among the most reliable high-volume production engines around.

How many liters is a 454?

For many years the 454 (7.4-liter) V8 was the top choice from GM, while Ford had the mighty 460 (7.5-liter) V8. In 1999, Ford put the 460, out to pasture when the 6.8-liter V10 was introduced in the new Super Duty pickups. But the big-block GM V8 soldiered on.

How many liters is a 427 engine?

The highly successful and versatile 427 cu in (7.0 L) version of the Mark IV engine was introduced in 1966 as a production engine option for full-sized Chevrolets and Corvettes.

What is a 5 Litre engine?

An example would be the Ford Mustang’s 5.0 liter engine. … This simply means that the cylinder space of the engine displaces 5 liters or roughly 302 cubic inches. Naturally, cars with more cylinders will typically have larger displacements.