Quick Answer: Does an automatic transmission need a cooler?

Most standard transmissions do not make as much heat and therefore do not have a cooler. The cooler for the automatic transmissions are placed inside the radiator, the reason behind this is the antifreeze provides the perfect environment.

Can you run a transmission without a cooler?

The healthy range of temperature for transmission fluid is about 71 to 93 degrees Celsius. If your transmission fluid exceeds this temperature, it will begin to burn. … Not only can burnt fluid not effectively cool your transmission, it can actively damage it, even after is has cooled down.

Is a transmission cooler a good idea?

As long as it is properly installed, a transmission cooler will not affect a factory transmission. It is a flow-through device and does not affect any internal components of the transmission. … Transmission fluid cannot be cooled too much, so the addition of a cooler is a good idea, especially if you are towing.

How do you cool an automatic transmission?

Allowing the car to idle in neutral, while sitting at red lights, in congested traffic or at rail road tracks, reduces the strain on the transmission, allowing the transmission to cool.

IMPORTANT:  What determines the maximum allowed towing capacity of a vehicle?

What kind of car usually needs a transmission cooler?

The transmission cooler is suitable for most standard vehicle types, and it proves to be ideal for small to midsize cars and trucks. With the capacity of 18,000 GVWR, it’s perfect for towing small loads and ideal for daily situations on the road.

Do transmissions have coolers?

In almost all vehicles with an automatic transmission there is a transmission cooler placed inside the radiator. Most standard transmissions do not make as much heat and therefore do not have a cooler.

Do all vehicles have transmission coolers?

While all automatic transmission equipped vehicles have a transmission cooler in their radiator, this might sometimes not be enough to properly cool your transmission fluid.

Can you put a transmission cooler on a CVT transmission?

Typically, this is a cooler that is one to two sizes larger than the recommended heavy-duty cooler. … A Hayden by-pass cooler can be used in these applications. Many vehicles now feature CVT transmissions and use a liquid-to-liquid cooler for the transmission.

How much does it cost to install a transmission cooler?

As a DIY project, you’ll pay between $30 and $60 for the oil cooler and spend 1 1/2 to 2 hours on installation. You can have a local transmission shop install a transmission oil cooler in your vehicle. Expect to pay between $150 and $250 for the job.

How do I stop my transmission from getting hot?

A transmission cooler provides extra cooling power to your car’s cooling system, assisting it in preventing the many hot, running systems in the engine from overheating. The best transmission cooler is a stack plate cooler.

IMPORTANT:  Question: Should you replace your engine or your car?

What temperature is too hot for an automatic transmission?

Fluid Life Expectancy vs Temperature

The ideal operating temperature of transmission fluid is 175 degrees. Overheating occurs after the temperature surpasses 200 degrees, and the failure rate doubles for every additional 20 degree increase after that.

How do I know if my transmission is overheating?

Is My Transmission Overheating?

  1. A sudden experience of a burning odor inside and outside the vehicle.
  2. The gears “slipping” when accelerating or decelerating.
  3. A feeling of hesitation or delayed gear shift when you are driving.
  4. Any grinding or shaking sensation that occurs while accelerating or while idling.