How much fluid does a Allison Transmission hold?

Allison 3000 transmissions can hold approximately 29 quarts of fluid; the larger Allison 4000 can hold approximately 48 quarts.

How much transmission fluid does an Allison 1000 hold?

ATF: Dexron-III (5 spd models) or Dexron-VI ATF (6 spd models), roughly 13 quart total fluid capacity and 7.4 quart refill capacity w/ filter change.

What type of fluid does an Allison Transmission take?

Advanced technology synthetic automatic transmission fluid

Mobil Delvac 1 ATF is a fully synthetic fluid recommended by Allison Transmission, Inc. and approved against the Allison TES-295 and TES-468 Specifications. The fluid is designed to meet the demanding requirements of modern heavy-duty automatic transmissions.

How many quarts of transmission fluid does a Duramax hold?

6.6L Duramax Fluid Specifications & Capacities

Engine oil 15W-40 10 qts w/ filter change
Automatic transmission fluid 2001 – 2005 (5 spd) 7.4 qts service refill 12.7 qts total capacity
2006 – 2016 (6 spd)
Manual transmission fluid ZF S6-650 (6 spd) 5.8 qts
Transfer case fluid 2001-2007 manual shift 2.0 qts
IMPORTANT:  You asked: Do I need to know about cars to work at AutoZone?

How much fluid does a 6 speed Allison transmission hold?

Allison transmission with a deep pan will take between 18 and 24 quarts of fluid for a full fill. Dropping the pan, if done without removing the truck, should require about 8 to 12 quarts, depending on the pan.

How many quarts does an Allison Deep Pan hold?

PPE’s Heavy-Duty DEEP Allison Transmission Pans hold an extra 4 quarts of fluid and are cast from high-quality aluminum for strength and optimal heat dissipation. Tall 1-inch internal and 3/4 inch external cooling fins reduce operating temperatures up to 40 degrees.

What kind of fluid goes in Allison 1000?

Allison Transmission TES 295® Approved Fluids are approved for use in Allison 1000 Series™, 2000 Series™, 3000 Series™, 4000 Series™ and H 40/50 EP™ on-highway products. Allison recommends that customers using TES 295® Approved Fluid consider Allison’s newest fluid spec, TES 668™, for their next service.

How much fluid does a Allison 2000 hold?

7.4 quarts (includes the pint for the spin-on) for the stock (shallow) pan – all you can drain. Torque for the drain plug is 25 foot pounds.

How often should you change Allison transmission fluid?

Allison says the fluid is good for 100,000 miles.

What is TES 295 transmission fluid?

Kendall SHP 295 is a full synthetic, heavy-duty automatic transmission fluid that offers excellent friction durability to ensure smooth shifting, outstanding low-temperature properties for year-round use and easy shifting in cold weather, as well as rust and corrosion protection.

How many quarts does a 6.6 Duramax hold?

2017 Duramax 6.6 Oil Type

IMPORTANT:  What indicates damage to the primary motor area?

You need 10 quarts of Duramax 15W-40 or 5W-40 oil to perform the change. That is if you have a filter installed (which is more likely).

How many gallons of oil does a 6.6 Duramax take?

The Duramax LMM engine has a maximum engine oil capacity of 9.2 quarts without the filter being replaced. With a new filter, the capacity increases to 10 quarts.

How many gallons of oil does a Duramax hold?

LML Duramax Specifications Chart

Manufactured Years: 2011-2016
Engine Oil Capacity: 10 Quarts with Filter or 9.5 Liters
DEF Fluid Capacity: 5 Gallons
Cooling System Capacity: 25.4 quarts or 24 Liters
Fuel: B20 Biodiesel Blend or Ultra Low Sulfur Diesel

How strong is the Allison 1000?

Initially the Allison 1000 was a 5 speed transmission, rated to handle up to 620 lb·ft (841 N·m) of torque. This rating has increased as the transmission was updated several times, to stand at 765 lb-ft(1037 N·m) by 2011 in GM truck applications.

How do I know if my Allison has a deep pan?

The quick answer is to look at the profile of your transmission pan. A DEEP pan is about 4.5-inches deep from the front to the rear of the pan while a SHALLOW pan is about 4-inches deep at the front of the pan while sloping to about 2.5-inches deep at the rear.

How long will an Allison 1000 last?

These trucks can (and do) regularly hit 200,000 miles. The truck and drivetrain will only last as long as you maintain it, though. There are parts that fail, just like anything else. But regular maintenance (fluid changes, body upkeep, hard part care) will help you have a very long relationship with your truck.

IMPORTANT:  Is the Subaru boxer engine a Porsche?