While it is not recommended to mix various brands of motor oil (such as Valvoline, Castrol, Total or Mobil 1), it will not cause any damage to your engine. What is far more important is to stick with the same oil viscosity as recommended by the car manufacturer.
Does it matter what engine oil I put in my car?
Does brand matter? As long as the grade and ACEA specification is correct, you should be fine. However, David Wright of the United Kingdom Lubricant Association recommends choosing reputable manufacturers. Some firms will blend more advanced, expensive oils that exceed the specifications on the packaging.
Can the wrong oil damage your engine?
Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.
Can I top off engine oil with a different brand?
You can add any engine oil as long as it has the right specifications — preferably with an official approval of the OEM (Original Equipment Manufacturer). Not the brand, but the specification and viscosity indicated in your car’s manual are your reference for using the right oil.
Can I put 10w40 instead of 5W30?
Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.
Can I put 5w40 instead of 5W30?
In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
Can you switch oil types?
No. Switching brands is not harmful to your engine as long as you choose an oil marked with the API donut of the same level, e.g., API SN. … You may give up enhanced performance if you switch from synthetic or high mileage to conventional oil. MYTH: When motor oil becomes dark, that means it’s time to change it.
Can I put synthetic oil in my car after using regular oil?
Yes. It is possible to use synthetic oil after using regular oil. However, it is important to contact your car manufacturer on whether you can use synthetic oil on the engine. … Synthetic oil makes the engine performance smoother and steady.
Can I add synthetic oil to regular oil?
yes. If you don’t have a choice, adding synthetic oil to regular oil can help you out in a pinch. … Since motor oils are generally made from the same ingredients (base oil and additives), they are typically compatible when mixed.
Can I mix motor oil brands?
WHAT ABOUT MIXING ENGINE OIL BRANDS? Yes. It won’t harm your engine to mix, for example, Quaker State® motor oil with Pennzoil, as long as the oil you use is the weight (or viscosity) recommended in your vehicle owner’s manual.
Does 10w30 hurt 5w30 engine?
Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.
Is 10w40 good for high mileage?
If both 10w30 and 10w40 are acceptable oil options for your car, it’s recommended that you use 10w40 for your car with high mileage. … The thicker oil helps older engines handle higher temperatures and manage wear and tear more efficiently. The thicker oil will reduce wear and tear and extend the life of your engine.
Is 5w30 good for high mileage?
5W-30 motor oil is the top viscosity recommendation by automakers over the past four decades for use in many vehicle types. … Furthermore, high-mileage 5W-30 motor oil is specially formulated for late model vehicles or newer vehicles with over 75,000 miles/120,000 kilometers.