Best answer: What will a 4l60e transmission fit?

The 4L60-E is found in nearly every GM rear-wheel-drive application, including the C/K Truck, Sonoma, Jimmy, Tahoe, Yukon, Astro, Safari, Suburban, Bravada, Firebird, Camaro and Corvette.

What years will a 4L60E transmission fit?

700R4/4L60E/4L65E Year Ranges

Year Ranges Transmission Pan/Filter
1994-1996 4L60E Shallow
1997 4L60E Shallow – Early Deep – Late
1998-2000 4L60E Deep
2001-2003 4L60E/4L65E Deep

Will a 4L60E work without computer?

Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. … Never mind TCC lockup; without a computer, the trans won’t shift at all.

What can I replace 4L60E with?

The 4L80E has been used in a number of 1/2-, 3/4-, and 1-ton GM trucks over the years. Upgrading from the 4L60E to the 4L80E is akin to going from a Dana 44 axle to a Dana 60–you’ll add some weight, but also add durability.

What vehicles does a 4L60E transmission fit?

What Vehicles Have A 4l60e Transmission?

  • Buick Rainier 2004-2007.
  • Buick Roadmaster 1994–1996.
  • Cadillac Escalade 1999-2000, 2002-2005 (models with LM7/5.3L V8 Also with 6.0 LQ9)
  • Cadillac Fleetwood 1994–1996.
  • Chevrolet Astro 1993-2005.
  • Chevrolet Avalanche 2002-2008.
  • Chevrolet S-10 Blazer 1994-2005.
  • Chevrolet Camaro 1994–2002.
IMPORTANT:  Is it illegal to drive a car without a drivers wing mirror?

How can you tell the difference between a 4L60E and a 4L60?

The rear output housing is configured with a six-bolt pattern in late model 4L60E transmissions. The 4L60 transmission is configured with a four-bolt pattern. The bolt pattern is not a guaranteed distinction, however, as early 4L60E transmissions, manufactured from 1992 through 1997, also have a four-bolt pattern.

Will a v6 4L60E transmission fit a v8 Chevy?

Registered. The 4L60E in the NNBS is identical except the harness in 2009-2013. 2007.5-2008 are the exact same regardless if is v6 or v8. The converter or flexplate may be different tho.

What does 4L60E stand for?

The 4L60E Transmission is a series of automatic transmission from General Motors. Previously named the THM700, and later renamed to 4L60 to fit into GM’s new naming convention. The “E” stands for the electronically shift controlled version of the 4L60 automatic transmission.

Which is better 4L60E or 700R4?

If the transmission has a large 18-pin electronic connector above the passenger side pan rail, it’s a 4L60E, as seen here. If it has a cable connection near the cooler lines on the passenger’s side, that’s a 700R4. The good news is that either way, you win.

How much HP can a 4L60E handle?

Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.

What’s the difference between 4L60E and 4L80E?

The 4L80E is larger and heavier than the 4L60E. Its more hefty build can be tied to its 236 lbs and a length of 26.4″. Alternatively, the 4L60E weighs 150 lbs (without fluid) and it has a length of 23.5″. A comparison between the size and weight shows that the 4L80E is significantly larger and heavier.

IMPORTANT:  Can you rebuild an engine without boring?

How can I make my 4L60E stronger?

Now, let’s dive in:

  1. Lay out the important parts on an assembly bench. …
  2. Rebuild with an improved, thicker sun shell. …
  3. Use five-pinion front/rear planetary. …
  4. Use a larger clutch with an input drum reinforcement sleeve. …
  5. Stamped Steel forward clutch apply pistons. …
  6. Use more clutches and larger gear band servo pistons.

Are 2WD and 4WD transmissions the same?

The main difference between a 2WD transmission vs a 4WD transmission is the output shaft. The Output shaft of a 4WD is shorter than a 2WD version. The 4WD transmission is also designed to mate up with a transfer case to engage 4WD and Lo-range (4L).

When did GM stop using the 4l60e?

The TH700R4 was renamed “4L60” (RPO MD8) following the new General Motors naming convention when the electronic version, 4L60E (RPO M30), was phased in as the 4L60 was being phased out. This happened in 1993 for trucks, vans, and SUVs, and 1994 for rear wheel drive passenger cars.

How do I find out what kind of transmission I have?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.