Best answer: Is Thicker oil better for older engines?

Newer vehicles can utilize thinner oils for faster lubrication of new engine parts. In contrast, older, high-mileage engines benefit from thicker oils to prevent friction and oil loss.

Should I use thicker oil in an older engine?

You should switch to thicker oil if your older car is consuming oil. The general rule is to always use the viscosity your car manufacturer recommended. … As your engine gets older, the clearances within the engine change due to wear and tear, and your car could start to consume oil.

What oil is good for older engines?

If the car you’re maintaining is worth extra care and extra cost, Amsoil Premium Protection Motor Oil is pretty much the best you can get. It’s available in 10W-40 and 20W-50 and is a synthetic-based engine oil. No doubt, your oil changes will cost quite a bit extra but Amsoil will protect your engine like none other.

IMPORTANT:  Question: Why do old cars only have one mirror?

Is it better to use thicker oil in high-mileage engine?

High-mileage motor oil doesn’t hurt and it could prevent leaks from starting. … Some mechanics recommend switching to a thicker (higher viscosity) oil — such as 10W-30 full synthetic oil instead of 5W-20 full synthetic — or using oil additives to stop leaks.

Is 10w40 better for older cars?

Applications of 10W-40 Motor Oil

Drivers commonly use 10W-40 motor oil in vehicles with higher mileage because the oil is thicker while the engine is hot; this helps lubricate older moving parts. This oil is meant to start up vehicles in winter climates that experience temperatures of 10 degrees Celsius.

What happens if I use 10W40 instead of 5w30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Is 10W40 thicker than 20W50?

Is 10w40 good for high mileage? 10W40 is not better than 20W50 for high mileage. The difference between 10w40 and 20w50 is simply that the latter is thicker. As far as gas mileage goes, no oil will improve your gas mileage by changing from 10W40 to 20W50 or vice versa.

Will heavier oil hurt my engine?

Using oil that is thicker than recommended may lead to a decrease in fuel economy, a higher load on your engine, and even a shorter life for your engine. Conversely, using thinner, lighter-weight oil than recommended can cause excessive wear and shorter life.

IMPORTANT:  Which auto parts store does free code reading?

Is full synthetic oil good for older engines?

Myth: Full synthetic oil is not good for high mileage cars or older vehicles. The myth is rooted in the idea that synthetic oil is “slipperier”—lower in viscosity, or not as compatible with seals and will therefore leak or leak more in places conventional oil might not. Again, completely untrue.

Is 10w40 thicker than 5w30?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Is 10w40 good for high mileage?

If both 10w30 and 10w40 are acceptable oil options for your car, it’s recommended that you use 10w40 for your car with high mileage. … The thicker oil helps older engines handle higher temperatures and manage wear and tear more efficiently. The thicker oil will reduce wear and tear and extend the life of your engine.

When should you use 20W50 oil?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

What kind of oil is best for high mileage engines?

10 Top-Rated Oils and Additives for High-Mileage Vehicles

  • Valvoline High Mileage with MaxLife Technology Synthetic Blend Motor Oil. …
  • Pennzoil High Mileage Motor Oil. …
  • Slick 50 Recharged High Mileage Treatment. …
  • Gumout Fuel System Cleaner. …
  • Royal Purple High Mileage Synthetic. …
  • Techron Fuel Cleaner. …
  • Mobil Super High Mileage Oil.
IMPORTANT:  Question: Can you damage a car battery by charging it?

What happens if I put 10W40 instead of 10W30?

As we have just seen, both 10W30 and 10W40 have winter SAE oil grades of 10W. … If you were to put 10W40 in an engine designed for 10W30, the “thicker” oil would lead to friction in the engine and an increased load on the oil pump. The car would have to do more work to get the oil around the engine block.

Is 10W30 thicker than 10W40?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures. Next, let’s find out how these multi viscosity oils compare in application and performance.

What does 10W30 mean?

For Example: 10W30

This means the viscosity is at 10W when the engine is cold and 30 when the engine is hot. Low viscosities are good for cold temperatures (hence the “W” association) because the oil is thinner. Thinner motor oil flows more easily and moves quickly.